ListarArtículo en revista de investigación por tema "info:eu-repo/classification/cti/7"
Mostrando ítems 401-420 de 574
-
Neural control and coordination of decentralized transportation robots
(2018-03-09)This work presents the modeling, control architecture and simulation of a decentralized multi-robot system for transporting material in a warehouse. Each robot has a task scheduler comprising two different neural networks ... -
New Formulation to Synthetize Semiconductor Bi2S3 Thin Films Using Chemical Bath Deposition for Optoelectronic Applications
(2022-11-24)Abstract: Anisotropic materials possess direction dependent properties as a result of symmetry within their structure. Bismuth sulfide (Bi2S3) is an important semiconductor exhibiting anisotropy due to its crystalline ... -
Nueva metodología para el análisis de sistemas mecánicos utilizando modelos a escala y leyes de similitud
(2018-08-17)The failures, unexpected and catastrophic, are presented in large mechanical systems, specifically, in the electric power generation. The development of new methodologies of analysis and research to evaluate and calculate ... -
Nueva metodología para el análisis de sistemas mecánicos utilizando modelos a escala y leyes de similitud
(2019-01-01)Los fallos, inesperadas y catastróficos se presentan en los sistemas mecánicos de gran tamaño, de forma específica, los de generación de energía eléctrica. El desarrollo de nuevas metodologías de análisis e investigación ... -
Numerical simulations of sandwich structures under lateral compression
(2019-06-30)The current paper analyzes the effect of the cross-section on the energy absorption capabilities of sandwich structures under compressive loads. For this purpose, several cross-section including triangular, square, ... -
Numerical study of a cross flow heat exchanger varying the transverse and longitudinal space to increase heat transfer
(2019-11-05)In this paper a numerical study of a cross flow heat exchanger varying the transverse and longitudinal space to increase heat transfer is presented. The numerical study consists of varying the transverse and longitudinal ... -
Numerical Study of the Energy Absorption Performance of 3D Printed Sandwich Structures
(2023-10-20)Nowadays, Fused Deposition Modeling (FDM) is a powerful tool for manufacturing complex components, due to its customizability, low cost, accessibility, and fast prototyping time. It is an alternative for creating ... -
O-carboxymethyl chitosan/gelatin/ silver-copper hydroxyapatite composite films with enhanced antibacterial and wound healing properties
(2022-08-21)Wound dressing composite films of O-carboxymethyl chitosan (OCMC) and gelatin were prepared and mixed with hydroxyapatite (HA) composited with Silver (Ag) and Copper (Cu) at different concentrations. The chemical, ... -
Online multi-criteria portfolio analysis through compromise programming models built on the underlying principles of fuzzy outranking
(2021-08-27)This paper introduces an interactive approach to support multi-criteria decision analysis of project portfolios. In high-scale strategic decision domains, scientific studies suggest that the Decision Maker (DM) can find ... -
Ontology-Based Operational Risk Identification in 3PL
(2018-09-18)Abstract. Supply chain risk management is an important activity in current supply chain management, and operational risk is one of the most important risks in supply chains. The risk identification process is one of the ... -
Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
(2021-01-02)In this work, we reported the synthesis of copper oxide (CuO) thin films by sol-gel process assisted by spin coating technique at room temperature. Chemical characterization of CuO precursor solution was determined by ... -
Optimización del diseño de los engranes del reductor de un vehículo todo terreno
(2019-12)En la actualidad existe la tendencia de diseñar componentes mecánicos capaces de soportar elevadas cargas de operación y que al mismo tiempo sean lo más ligeros posibles. Ambas condiciones son opuestas ya que, al aligerar ... -
Optimización del Recorrido de Desperdicios Sólidos Industriales Mediante Dispositivo de Medición y Comunicación
(2020-07-12)El presente proyecto tiene como objetivo el diseño de un control sistematizado sobre los contenedores de residuos en el ámbito industrial. Por lo cual se utilizaron diversas herramientas como el dispositivo físico que esta ... -
Optimización topológica de una biela de motor de combustión interna utilizando elemento finito
(2022-06-01)En la presente investigación, se realizó la optimización topológica a una biela de motor de combustión interna, con el propósito de reducir su material componente y mantener en un rango aceptable sus propiedades mecánicas ... -
Optimización topológica del brazo de suspensión inferior mediante elemento finito
(2019-12-02)En esta investigación, se realizó la optimización topológica (OT) del brazo de control inferior (BCI) Mcpherson tipo L, el objetivo de este estudio es reducir peso en el componente y mantener las propiedades mecánicas ... -
Optimization of Running Blade Prosthetics Utilizing Crow Search Algorithm Assisted by Artificial Neural Networks
(2021-02-05)A crow search algorithm (CSA) was applied to perform the optimization of a running blade prosthetics (RBP) made of composite materials like carbon fibre layers and cores of acrylonitrile butadiene styrene (ABS). Optimization ... -
Outranking-based multi-objective PSO for scheduling unrelated parallel machines with a freight industry-oriented application
(2021-12-08)This paper presents Outranking-based Particle Swarm Optimisation (O-PSO) a novel metaheuristic to address the multi-objective Unrelated Parallel Machine Scheduling Problem. It is a particle swarm optimisation algorithm ... -
Parametrización de un péndulo simple con una plataforma basada en Arduino
(2020-01-15)En el presente trabajo se obtienen las expresiones matemáticas necesarias para determinar los parámetros de la inercia y el coeficiente de fricción de un péndulo simple. Las ecuaciones resultantes obtienen a partir del ... -
PFDA-FMEA, an Integrated Method Improving FMEA Assessment in Product Design
(2021-02-04)Product Design (PD) currently faces challenges in new product development, since the industry is in a rush to introduce new products into the market, with customers demanding products that are faster, cheaper, and free ...