Listar Artículo en revista de investigación por autor "0000-0003-2651-8863"
Mostrando ítems 1-5 de 5
-
Comparison of the corrosion performance of alloys HP40 and T22 exposed to molten salts at high temperature
Clemente, Christian; Cuevas Arteaga, Cecilia; Sotelo-Mazón, Oscar; Ramírez Rodríguez, José Alfredo (2021-02-27)The molten salt corrosion performance of SS-HP40 with high Cr content and carbon steel T22 with low Cr content were investigated. The corrosion behavior was obtained using three techniques: potentiodynamic polarisation ... -
Corrosion Fatigue Analysis in Power Steam Turbine Blade
Zalapa Garibay, Manuela Alejandra; Guillén Anaya, Luis Gonzalo; Clemente, Christian; Rodríguez Ramírez, José Alfredo; García Castrejón, Juan Carlos (2023-03-08)The corrosion fatigue behavior of a martensitic stainless steel AISI 410 with 12% Cr, used in the fabrication of steam turbine blades at low pressure (L-P), was studied using the electrochemical noise technique (EN) under ... -
Crevices corrosion in cracks of aisi-410 used in steam turbines blades
Cuevas-Arteaga, Cecilia (2018-06-12)In this paper the effect of temperature on corrosion crack propagation produced in a stainless steel AISI-410 type was studied. The previously cracked specimens through a rotatory machine were exposed in seawater during 5 ... -
Nueva metodología para el análisis de sistemas mecánicos utilizando modelos a escala y leyes de similitud
Mariaca, Yahir De Jesus (2018-08-17)The failures, unexpected and catastrophic, are presented in large mechanical systems, specifically, in the electric power generation. The development of new methodologies of analysis and research to evaluate and calculate ... -
Nueva metodología para el análisis de sistemas mecánicos utilizando modelos a escala y leyes de similitud
Rodriguez, Jose (2019-01-01)Los fallos, inesperadas y catastróficos se presentan en los sistemas mecánicos de gran tamaño, de forma específica, los de generación de energía eléctrica. El desarrollo de nuevas metodologías de análisis e investigación ...