Listar Artículo en revista de investigación por autor "0000-0002-7092-6963"
Mostrando ítems 41-60 de 112
-
Exergy analyses and optimization of a single flash geothermal power plant combined with a trans-critical CO2 cycle using genetic algorithm and Nelder–Mead simplex method
García-Alcaraz, Jorge Luis; 216622; Huang, Jian; Abed, Azher M.; Eldin, Sayed M.; Aryanfar, Yashar (2023-02-08)Compared with conventional fossil fuel sources, geothermal energy has several advantages. The produced geothermal energy is safe for the environment and suitable for meeting heating power needs. Because the hot water used ... -
Exergy and exergoenvironmental assessment of a geothermal heat pump and a wind power turbine hybrid system in Shanghai, China
García-Alcaraz, Jorge Luis; Aryanfar, Yashar; 216622 (2023-04-24)Geothermal heat pumps are one of the most growing and cost-efective renewable energy technologies based on the temperature diference between the ground and the environment. In the cold seasons, the temperature inside the ... -
Finding the Best Third-Party Logistics in the Automobile Industry: A Hybrid Approach
Karbassi Yazdi, Amir (2018-11-18)Given the current economic climate, many companies are considering outsourcing some activities to reduce costs and to focus on their core competency; thus, by adopting a competency-focused approach they enhance their ... -
Fortalezas en la modalidad e-learning en educación media superior durante la pandemia
García-Alcaraz, Jorge Luis; Garcia Alcaraz, Pedro (2022-01-01) -
Geometric considerations for the 3D printing of components using fused filament fabrication
García-Alcaraz, Jorge Luis; Hernandez Arellano, Juan Luis; 171870; Aguilar Duque, Julian (2020-06-30)Demand in 3D printing products using fused filament fabrication (FFF) in industry has been growth a lot with 55% in development of prototypes, 43% in production, and 41% in conceptual models for testing. However, information ... -
Government Support and Market Proximity: Exploring Their Relationship with Supply Chain Agility and Financial performance
Avelar, Liliana (2018-07-12)The current paper presents a structural equation model with four variables (Government, Infrastructure, Proximity to market, and supply chain Agility) affecting the Financial performance of a company. Six hypotheses or ... -
Human Resource Abilities and Skills in TQM for Sustainable Enterprises
García-Alcaraz, Jorge Luis (2019-11-18)Abstract: Total quality management (TQM) is a lean manufacturing tool that focuses on ensuring the production of goods that meet design specifications and give customer satisfaction, both attractive benefits highly appreciated ... -
Impact of human resources on remanufacturing process, internal complexity, perceived quality of core, numerosity, and key process indicators
Arredondo-Soto, Karina (2019)This article assesses the impact of human resources experience and its training level on key process indicators, perceived quality of core, and internal complexity of remanufactured metal-mechanic products. These five ... -
Impact of infrastructure and production processes on rioja wine supply chain performance
Díaz Reza, José Roberto (2018-01-04)This paper presents a structural equation model for analyzing the relationship between four latent variables: infrastructure, production processes, transport benefits, and economic benefits within the supply chain for wine ... -
Impact of Managers and Human Resources on Supply Chain Performance
Mendoza Fong, José Roberto (2019-03-01)Current competitive, complex, and uncertain markets push companies toward increasing active collaboration on the part of all human resources (HR) involved in the supply chain (SC), because increasing employee participation ... -
Impact of the Planning from the Kanban System on the Company’s Operating Benefits
Mojarro Magaña, Maria (2018-07-17)This article reports a model regarding the structural equations of the impact of the planning phase and the benefits acquired in the implementation of the kanban system. It begins with a literature review of the activities ... -
Implementation of Production Process Standardization—A Case Study of a Publishing Company from the SMEs Sector
Realyvásquez Vargas, Arturo (2019-09-21)This paper reports a case study using a standardization process for increasing efficiency and a better optimization of resources in a printing company with 150 operators having manual and mechanical tasks in the box assembly ... -
Importance of organizational structure for TQM success and customer satisfaction
García-Alcaraz, Jorge Luis (2019-10-08)This paper reports a structural equation model to relate three critical success factors for total quality management (TQM) (i.e. managerial commitment, role of quality department, and quality policies) with customer ... -
Improving a Manufacturing Process Using the 8Ds Method. A Case Study in a Manufacturing Company
García-Alcaraz, Jorge Luis; Realyvásquez, Arturo; Arredondo Soto, Karina Cecilia; BLANCO, JULIO; Jimenez, Emilio (2020-04-02)Customer satisfaction is a key element for survival and competitiveness in industrial companies. This paper describes a case study in a manufacturing company that deals with several customer complaints due to defective ... -
Information Sharing with ICT in Production Systems and Operational Performance
Perez Lopez, Ruben Jesus (2019-07-02)In globalized times the integration of information and communication technologies in companies and their supply chains is required, but there is uncertainty regarding the true impact that these have on e ciency indices or ... -
Infrared thermal imaging monitoring on hands when performing repetitive tasks: An experimental study
García-Alcaraz, Jorge Luis; Garcia Becerra, Alejandra; Olguin Tiznado, Jesus Everardo; Camargo Wilson, Claudia; Garcia Rivera, Rosa; Vardasca, Ricardo; Lopez Barreras, Juan Andres (2021-05-12)The monitoring of infrared thermal images is reported to analyze changes in skin temperature in the hand fingers when repetitive work is performed to know which finger has a greater risk of injury, besides, the recovery ... -
Integrating and Controlling ICT Implementation in the Supply Chain: The SME Experience from Baja California
García-Alcaraz, Jorge Luis; Perez Lopez, Ruben Jesus; Olguin Tiznado, Jesus Everardo; Mojarro Magaña, Maria; Camargo Wilson, Claudia; Lopez Barreras, Juan Andres (2021-05-28)It is mentioned that companies’ competition is currently more associated with supply chains (SC) than production processes since sometimes logistics costs represent up to 70% of the total production cost in a product. ... -
IntelliHome: An internet of things-based system for electrical energy saving in smart home environment
Pardes Valverde, Mario A. (2019-09-28)Despite there has been an increasing energy price due to factors such as supply, demand, government regulation, among others, users do not like to spend their time to analyze their power consumption and establish actions ... -
Introducing and assessment of a new wind and solar-based diversified energy production system intergrading single-effect absorption refrigeration, ORC, and SRC cycles
García-Alcaraz, Jorge Luis; 216622; Mohtaram, Soheil; Weidong, Wu (2022-09-03) -
Introduction and configuration of a collaborative robot in an assembly task as a means to decrease occupational risks and increase efficiency in a manufacturing company
Realyvásquez Vargas, Arturo (2019-03-01)Occupational risk factors (e.g. awkward postures, excessive effort, and repetitive movements) are a growing concern in the manufacturing industry due to their relationship with the incidence of musculoskeletal disorders ...