Mostrar el registro sencillo del ítem

dc.contributor.authorReynoso Jardón, elva
dc.date.accessioned2023-01-09T16:51:13Z
dc.date.available2023-01-09T16:51:13Z
dc.date.issued2022-11-23es_MX
dc.identifier.urihttp://cathi.uacj.mx/20.500.11961/24174
dc.description.abstractIn aviation, safety is an essential factor, even when aircraft are on the ground. For this reason, it is imperative to meet the needs of the pavements that support air operations within the airport. These pavements require a specific preparation and deposition process that are governed by standards that consolidate their quality and service. However, when the infrastructure is not prepared to meet a higher demand than it was designed for, la-tent conditions usually arise that could put the operation and those involved in it at risk. Due to the above, this research aims to develop a proposal for improvement in the preventive maintenance process of the pavements of the Ciudad Juárez International Airport. For which it is required to make an analysis of the current conditions of the pavements to identify the existing faults and evaluate their possible effects on the aerial operation from which a proposal will be developed in the inspection process of rigid and flexible pavements. The result obtained is a manual that serves as a guide and describes an inspection method for preventive maintenance, which is practical and specific for the Ciudad Juárez Airport, specifying the characteristics of each failure to be properly addressed. This study seeks to support the personnel in charge in making decisions about the mainte-nance required by the pavements, which can contribute to the safety of passengers and personnel.es_MX
dc.description.urihttp://erevistas.uacj.mx/ojs/index.php/memoriascyt/article/view/5518/6770es_MX
dc.language.isospaes_MX
dc.publisherUACJes_MX
dc.relation.ispartofProducto de investigación IITes_MX
dc.relation.ispartofInstituto de Ingeniería y Tecnologíaes_MX
dc.rightsCC0 1.0 Universal*
dc.rights.urihttp://creativecommons.org/publicdomain/zero/1.0/*
dc.subjectmaquinados CNC; inteligencia artificial; calibración; optimización; productividades_MX
dc.subject.otherinfo:eu-repo/classification/cti/7es_MX
dc.titleOptimización del proceso de calibración del WCS y TCS en centros de maquinado CNC de tres ejes con algoritmos de IAes_MX
dc.typeMemoria en abstractes_MX
dcterms.thumbnailhttp://ri.uacj.mx/vufind/thumbnails/rupiiit.png
dcrupi.institutoInstituto de Ingeniería y Tecnologíaes_MX
dcrupi.cosechableSies_MX
dcrupi.subtipoInvestigaciónes_MX
dcrupi.alcanceLocales_MX
dcrupi.paisMéxicoes_MX
dcrupi.tipoeventoColoquioes_MX
dcrupi.evento4o Coloquio de Posgrados IITes_MX
dcrupi.estadoChihuahuaes_MX
dc.contributor.coauthorexternoMeraz Mendez, Manuel
dcrupi.pronacesSeguridad humanaes_MX


Archivos en el ítem

Thumbnail
Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

CC0 1.0 Universal
Excepto si se señala otra cosa, la licencia del ítem se describe como CC0 1.0 Universal

Av. Plutarco Elías Calles #1210 • Fovissste Chamizal
Ciudad Juárez, Chihuahua, México • C.P. 32310 • Tel. (+52) 688 – 2100 al 09