Listar IIT por autor "0000-0002-9130-4450"
Mostrando ítems 1-6 de 6
-
Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP
Garay Reyes, Carlos Gamaliel (2019-09-05)The present work evaluates the effect of both, Fe impurities and Cr addition, in nanostructured WC-10Co cemented carbides, which are sintered by hot isostatic pressing. Fe impurities and Cr addition in nanostructured WC-10Co ... -
Effect of Hot Deformation and T6 Heat Treatment On Precimitation Betha-Phase and Microhardbess on A356 Modified With Ni
Medrano Prieto, Hansel Manuel (XXVIII International Materials Research Congress, 2019-08-18)Al-Si alloys are applied in automotive industries owing to corrosion resistance, excellent strength/weight ratio and high fluidity. The typical as-cast microstructure of A356 alloy is composed by Al dendrites, interdendritic ... -
Effect of Ni Addition and T6 Heat Treatment on Microstructure and Microhardness of Hot Plastic Deformed (Al-Si-Mg) Alloys
Medrano Prieto, Hansel Manuel (Cambridge University Press, 2019-08-31)A356 (Al-Si-Mg) alloy have been widely used in the automotive, aerospace and military industries due to their high castability, corrosion resistance and excellent strength/weight ratio. The most important alloying elements ... -
Effect of Rare Earth Ce/La Addition on the Microstructure and Hardness of Nickel-Based Superalloy Inconel 718
Medrano Prieto, Hansel Manuel (XXVIII International Materials Research Congress, 2019-08-19)Superalloy Inconel 718 is employed in aeronautic/aerospace engines, nuclear and chemical industries due to its high oxidation resistance and excellent mechanical properties at elevated temperatures. In recent years, research ... -
Effect of Trace Ce/La Addition on the Microstructure and Microhardness of Nanostructured Nickel-based Superalloy Inconel 718
Medrano Prieto, Hansel Manuel (Cambridge University Press, 2019-08-31)The nickel-base superalloy Inconel 718, have excellent properties to be used in high temperature applications, its principal characteristics are: high resistance to oxidation, good mechanical properties in elevated work ... -
Impact of carbon nanotubes in a CrFeMnNiTi alloy proposed as a potential candidate for stainless-steel substitution
Hernandez Castro, Z (2019-11-01)In the steel industry, the fabrication of sintered products includes the use of graphite as an alloying element and lubricant. This study explores the idea that a sintered alloy with increased properties can be produced ...