Listar IIT por autor "0000-0002-2241-9545"
Mostrando ítems 41-56 de 56
-
Optimización de piezoeléctricos ecológicos por medio del monitoreo in situ de la viscosidad uniaxial
Camacho Montes, Hector (2021-10-16)El informe de la segunda etapa del proyecto comprende dos avances fundamentales. El primero consiste en los desarrollos teóricos que afortunadamente no sufrieron afectaciones debido a la contingencia. Se logró completar ... -
Optimización de piezoeléctricos ecológicos por medio del monitoreo in situ de la viscosidad uniaxial. Primera etapa
Camacho Montes, Hector (2020-12-08)Se presentó el primer informe del proyecto A1-S-9232 “Optimización de piezoeléctricos ecológicos por medio del monitoreo in situ de la viscosidad uniaxial” Primera etapa, donde se exponen los logros y los atrasos que se ... -
Overall properties for elastic micropolar heterogeneous laminated composites with centro-symmetric constituents
Espinosa-Almeyda, Yoanh (Springer, 2023-04-12)In this work, the effective properties of multi-phase periodic laminated Cosserat composite are computed by means of the two-scale asymptotic homog- enization method (AHM). The statements of the local problems and the ... -
Photocatalytical degradation of methyl orange (MO) using ZnO nanoparticles from alkaline wasted batteries. The effect of the MO, catalyst, and organic loads
Hernandez Paz, Juan Francisco; Olivas Armendariz, Imelda; Camacho Montes, Hector; Rodriguez Gonzalez, Claudia; 160317; Arroyo Ortega, Guillermo; Reyes Blass, Hortensia; 160317 (2022-11-01)The photocatalytic degradation of methyl orange (MO) using ZnO nanoparticles is reported. NPs in the range of 40-60 nm were obtained from wasted alkaline batteries anodes. The effect of the MO concentration and the catalyst ... -
Semi-analytic finite element method applied to short-fiber-reinforced piezoelectric composites
Camacho Montes, Hector; Barraza de León, Lorenzo Efrain; Espinosa Almeyda, Yoanh; Otero Hernández, Jose Antonio; Rodríguez Ramos, Reinaldo; López Realpozo, Juan Carlos; Sabina Ciscar, Federico J; 183327 (2021-06-30)In this work, a 3D semi-analytical finite element method (SAFEM) is developed to calculate the effective properties of piezoelectric fiber-reinforced composites (PFRC). Here, the calculations are implemented in one-eighth ... -
Síntesis de película polimérica con puntos cuánticos de plata con posible aplicación en regeneración de la capa dérmica.
Olivas Armendariz, Imelda (2021-12-14)Cuando se genera una lesión en la piel existe una gran problemática por la falta de opciones eficientes y de alta disponibilidad que le brinden al organismo una recuperación rápida, efectiva, segura y sin problemas a ... -
Synthesis and Characterization of Carbon Aerogels Electrodes Modified by Ag2S Nanoparticles
Rodriguez Gonzalez, Claudia; Hernandez Paz, Juan Francisco; Jimenez Vega, Florinda; Camacho Montes, Hector; Olivas Armendariz, Imelda; 171919; 171919 (2021-02-21)In this work, electrodes based on carbon aerogels (CA) modified by Ag2S nanoparticles (NPs) were synthesized by sputtering and solid-vapor reactions. Nanoparticles were identified as silver sulfide (acanthite phase) and ... -
SYNTHESIS AND CHARACTERIZATION OF LLZO SOLID ELECTROLYTE EMPLOYING XRD AND EIS TECHNIQUES
Camacho Montes, Hector; Enriquez Carrejo, Jose Luis; 240245; Lopez Ibarra, Aurora Abigail; Herrera Robles, Joel (Sociedad Mexicana de Materiales, 2023-08-13)Solid electrolytes for lithium batteries are considered as an alternative to face some of the batteries problem applications. Materials such as Li7La3Zr2O12 (LLZO) have shown good Li-ionic conductivity. In this work, LLZO ... -
Synthesis and characterization of niobium doped bismuth titanate | Síntesis y caracterización del titanato de bismuto dopado con niobio
Garcia Casillas, Perla Elvia; Olivas Armendariz, Imelda; Mani Gonzalez, Pierre Giovanni; Camacho Montes, Hector; Y, Espinosa Almeyda; Gamaliel, Hernandez Cuevas; Jose Roberto, Leyva Mendoza; S, Días de la Torre; O, Raymond Herrera; Eduardo, Martinez Guerra (2021-12-21)Pure and niobium doped bismuth titanate ceramics Bi4Ti3−xNbxO12(Nb − BiT) with x ranging from 0% to 2% are prepared by sol–gel method. Pellets are sintered by pressureless sintering (PLS) and spark plasma sintering (SPS). ... -
Synthesis And Characterization Of Silver Nano-Clusters Stabilized With BSA/PVP
Rodriguez Gonzalez, Claudia; Hernandez Paz, Juan Francisco; Jimenez Vega, Florinda; Chavarria Gaytan, Maria Concepcion; Camacho Montes, Hector; Arrieta Sandoval, Nataly (Sociedad Mexicana de Materiales, S.A., 2021-08-18)The application of nanotechnology through the use of nanodevices, that integrate biological materials and nanometric materials, allows the development of new diagnostic tools for identifying diseases in their earliest ... -
Temperature effect on electrochemical properties of lithium manganese phosphate with carbon coating and decorating with MWCNT for lithium-ion battery
Camacho Montes, Hector; Herrera Robles, Joel Obed; García Casillas, Perla Elvia; Velasco Santos, Carlos; Martínez Hernández, Ana Laura; Raymond Herrera, Oscar; Matutes Aquino, José Andrés; Fuentes Cobas, Luis Edmundo; Alvarez Contreras, Lorena; Bordia, Rajendra Kumar (2023-04-13)The increasing demands for higher energy density and higher power capacity of Li-ion secondary batteries have led to a search for electrode materials whose capacities and performance are better than those available today. ... -
Textiles antimicrobianos de acuerdo a la norma ASTM F2100 y ATCC60
Rodriguez Gonzalez, Claudia (2022-12-12)El presente proyecto tiene como objetivo principal aplicar tratamientos de estructuras jerárquicas de compuestos de cobre y de óxido de zinc a textiles para que cumplan con las normas ASTM F2100 y ATCC60. En este reporte ... -
The effectiveness of published continuum constitutive laws to predict stress-assisted densification of powder compacts
Camacho Montes, Hector (2022-10-10)Commonly used constitutive laws for crystalline and viscous materials have been compared to predict the densification behavior under hot-pressing and sinter-forging. Experimental results, from literature for one loading ... -
USING THE EFFLORESCENCE MECHANISM OF PORTLAND CEMENT TO OBTAIN A BRIGHT CRYSTALLINE CALCIUM CARBONATE SURFACE
Hernandez Paz, Juan Francisco; Rodriguez Gonzalez, Claudia; Camacho Montes, Hector; Sandoval-Granados, José Luis; 198613 (Sociedad Mexicana de Materiales, 2022-08-01)Various types of materials are used in the construction industry, one of the most important is the Portland cement, which is used for prefabricated elements or for joining various materials, and sometimes it is hydrated ... -
Validation of a computational model based on a hybrid approach between the asymptotic homogenization and finite element methods for magneto-electro-elastic micromechanical characterization
Camacho-Montes, Hector (Sociedad Mexicana de Materiales, A.C., 2018-08-19)A hybrid approach between the asymptotic homogenization (AHM) and finite element (FEM) methods has been developed with the objective of studying a wide range of types of composites materials. The AHM is based on developing ... -
WO3-x THIN FILMS WITH Al, Pt Au AND Mo DOPING: SEARCHING FOR PIEZOELECTRICITY
Ramos Murillo, Manuel Antonio; Enriquez Carrejo, Jose Luis; Camacho Montes, Hector; 206521; Pineda Domínguez, Pamela Marcela; Nogan, John; Lopez Galan, Oscar Alberto; Boll, Torben; Hurtado Macias, Abel; Lopez, Jorge; Garay, Yahir; Heilmaier, Martin (Sociedad Mexicana de Materiales, 2022-08-15)The present work focuses on the fabrication of WO3 thin films doped with Al, Pt, Au and Mo with a thickness in a range of 150 nm – 250 nm. The films were deposited by radio-frequency sputtering at 225 W of RF power commercial ...